pull rod

An analysis on effective factors to fatigue lives of pull rod linking lugs of tube shaped cases

筒形机匣连接凸耳疲劳寿命及其影响因素

Pull rod is the main bearing part of compact rolling mill and usually occurred abruption accidents.

拉杆是紧凑式轧机的主要受力件,经常发生断裂事故.

This paper presents a computation method for a new type of retaining structure& the anchor pile with a pull rod.

本文介绍一种新型支挡结构物&具有拉杆的锚固桩的计算方法。

In addition, the structures of the crosshead and guide plate and the seal at the pull rod end are modified.

同时，对滑块滑套摩擦副的结构及拉杆端密封结构进行了改进设计。

the mechanic replaced the hand brake lever pull rod yoke.

机械师更换了手制动杆拉杆轭。

Influence of locating stiffness of axle-box pull rod to the horizon dynamics performance of 2C_0 locomotive with motor mounted on frame

轴箱拉杆定位刚度对2C0架悬机车横向动力学性能的影响

Analysis on axle-box positioning stiffness for double pull-rod locomotive bogie

双拉杆式机车转向架轴箱定位刚度分析

aileron servo pull rod should be vertical to the shaft of aileron basically. in the pilot house, dwyer was already fighting the wheel.

副翼舵机拉杆应基本上垂直于副翼转动轴线。在驾驶室里，德怀尔已经跟舵轮较上劲了。

The equipment selection and process of pull rod construction, and notice of operation are introduced.

介绍拉杆施工的设备选型及拉杆施工的工艺流程, 并在操作中应注意的几个问题.

The pull rod is screwed into the inside thread of the anchor head.

将拉杆旋入锚头内的丝扣.

one pull rod set inside the sliding chute with one end connected to the pull part;

一拉杆，设置于该滑槽内，并一端连接于扳动件而受其拉动；

These are safety screw and safety switch installed on the double pull rod.

双拉臂上安装保险螺丝及保险开关.

Importance of height-regulating the hole for central pull rod in hanging machinery set

谈高度调节悬挂机组中央拉杆安装孔的作用

a pull rod forms another articulated point together with the top working roll through the pin roll;

拉杆通过销轴与上工作辊组成另外铰接点；

Strut-and-tie model reinforcement of the external prestressed box-beam anchor block Aileron servo pull rod should be vertical to the shaft of aileron basically.

体外预应力箱梁锚固块拉压杆模型法配筋副翼舵机拉杆应基本上垂直于副翼转动轴线。

Aileron servo pull rod should be vertical to the shaft of aileron basically.

副翼舵机拉杆应基本上垂直于副翼转动轴线.

The utility model is composed of a handle, a pull rod, a barrel body, a piston, a bottom plate, an oil inlet valve, an oil outlet valve, etc.

本实用新型由手柄、拉杆、筒体、活塞、底板、进油阀、出油阀、等部件所构成。

pull rod type slack adjuster

拉杆间隙调整器

Control technology of initial tension of pull rod in sheet-piled wharf construction

板桩码头施工中拉杆初始张拉力的控制

the pull rod part of the ball head tie rod can be stamped into a hollow hexagonal prism;

球头横拉杆的拉杆部分可冲压成空心六棱柱体；

The Method for Computation of Anchor Pile with a pull Rod

具有拉杆的锚固桩的计算方法

double link jib with straight fly jib and pull rod

直线象鼻架拉杆组合臂架

One end of the rotation axle is connected with an electromagnet by a pull rod and a weight rod.

转动轴的一端通过拉杆和重锤杆与电磁铁相连。

The longitudinal and lateral stiffness components for the double pull-rod axle-box is analyzed and influences of parameters of the rubber components on positioning stiffness is compared. The model is built.

分析双拉杆式轴箱定位的纵横刚度组成，比较各橡胶元件参数对定位刚度的影响，建立了双拉杆式轴箱定位刚度的模型。

Cracking Analysis and Improvement Measures of Front Flap Pull Rod

前襟操纵拉杆开裂分析及改进措施

hand brake pull rod guide anchor

手制动拉杆吊

the pull rod is screwed into the inside thread of the anchor head .

这是钻杆丝扣油，不能用在钻铤丝扣上。

The ballute consists of a ballute cover and ropes, and the ropes are respectively connected with the sliding axle in the chute and the pull rod in the semicircular arc-shaped pull rod bracket.

气伞由伞罩、绳索组成，绳索分别与滑槽内滑动轴和半圆弧形拉杆架内拉杆连接。

The locating stiffness of the axle-box pull rod has an important relation with the dynamics performance of the locomotive, it also has a very big influence to the critical speed of the locomotive.

轴箱拉杆定位刚度与机车动力学性能密切相关，同时对机车的临界运行速度也有很大的影响。